Is three-piece maxillary segmentation surgery a stable procedure?

Objective: : The number of three-piece maxillary osteotomies has increased over the years; however, the literature remains controversial. The objective of this study was to evaluate the skeletal stability of this surgical modality compared with that of one-piece maxillary osteotomy. Methods: : This retrospective cohort study included 39 individuals who underwent Le Fort I maxillary osteotomies and were divided into two groups: group 1 (three pieces, n = 22) and group 2 (one piece, n = 17). Three cone-beam computed tomography scans from each patient (T1, pre-surgical; T2, post-surgical; and T3, follow-up) were used to evaluate the three-dimensional skeletal changes. Results: : The differences within groups were statistically significant only for group 1 in terms of surgical changes (T2-T1) with a mean difference in the canine region of 3.09 mm and the posterior region of 3.08 mm. No significant differences in surgical stability were identified between or within the groups. The mean values of the differences between groups were 0.05 mm (posterior region) and -0.39 mm (canine region). Conclusions: : Our findings suggest that one- and three-piece maxillary osteotomies result in similar post-surgical skeletal stability.

Enhancing skeletal stability and Class III correction through active orthodontist engagement in virtual surgical planning: A voxel-based 3-dimensional analysis.

INTRODUCTION: Skeletal stability after bimaxillary surgical correction of Class III malocclusion was investigated through a qualitative and quantitative analysis of the maxilla and the distal and proximal mandibular segments using a 3-dimensional voxel-based superimposition among virtual surgical predictions performed by the orthodontist in close communication with the maxillofacial surgeon and 12-18 months postoperative outcomes. METHODS: A comprehensive secondary data analysis was conducted on deidentified preoperative (1 month before surgery [T1]) and 12-18 months postoperative (midterm [T2]) cone-beam computed tomography scans, along with virtual surgical planning (VSP) data obtained by Dolphin Imaging software. The sample for the study consisted of 17 patients (mean age, 24.8 ± 3.5 years). Using 3D Slicer software, automated tools based on deep-learning approaches were used for cone-beam computed tomography orientation, registration, bone segmentation, and landmark identification. Colormaps were generated for qualitative analysis, whereas linear and angular differences between the planned (T1-VSP) and observed (T1-T2) outcomes were calculated for quantitative assessments. Statistical analysis was conducted with a significance level of α = 0.05. RESULTS: The midterm surgical outcomes revealed a slight but significantly less maxillary advancement compared with the planned position (mean difference, 1.84 ± 1.50 mm; P = 0.004). The repositioning of the mandibular distal segment was stable, with insignificant differences in linear (T1-VSP, 1.01 ± 3.66 mm; T1-T2, 0.32 ± 4.17 mm) and angular (T1-VSP, 1.53° ± 1.60°; T1-T2, 1.54° ± 1.50°) displacements (P >0.05). The proximal segments exhibited lateral displacement within 1.5° for both the mandibular right and left ramus at T1-VSP and T1-T2 (P >0.05). CONCLUSIONS: The analysis of fully digital planned and surgically repositioned maxilla and mandible revealed excellent precision. In the midterm surgical outcomes of maxillary advancement, a minor deviation from the planned anterior movement was observed.

Assessment of the bone thickness of the palate on cone-beam computed tomography for placement of miniscrew-assisted rapid palatal expansion appliances.

INTRODUCTION: The correction of maxillary transverse discrepancy is achieved by means of rapid maxillary expansion, which may be performed by conventional or surgically-assisted rapid maxillary expansion, and more recently, by miniscrew-assisted rapid palatal expansion (MARPE). This study assessed the bone thickness of the palate on cone-beam computed tomography (CBCT) images for placement of mini-implants and anchorage of MARPE. METHODS: The sample consisted of 223 CBCT scans from patients of both genders (137 females and 86 males) aged ≥18 years. By using the Image Studio software (Anne Solutions, São Paulo, Brazil), measurements of the bone thickness of the palate were performed bilaterally, as follows: in the axial plane, the bone thicknesses were determined in the anterior region (distal face of the first premolars) and the posterior region (distal face of the first molars), at 3 mm and 6 mm laterally to the midpalatal suture. So in the sagittal plane, the bone thicknesses of the palate were measured in these placements from the palatal cortical to the nasal floor cortical in the anterior region at 30°, 45°, and 90°. In the posterior region, the bone thickness was determined only at 90°. The statistical tests used were the Kruskal-Wallis H test (analysis of variance on ranks) with Dunn's post-hoc test and Mann-Whitney U test (P <0.05). RESULTS: The bone thickness of the palate in the anterior region varied from 8.57 mm in women to 11.28 mm in men at 3 mm from the midpalatal suture and from 7.99 mm in women to 10.47 mm in men at 6 mm for 30°; from 6.35 mm in women to 9.28 mm in men at 3 mm from the midpalatal suture and from 6.20 mm in women to 8.88 mm in men at 6 mm for 45°; from 4.51 mm in women to 6.85 mm in men at 3 mm from the midpalatal suture and from 4.29 mm in women to 6.64 mm in men at 6 mm for 90°. In the posterior region, the bone thickness varied from 2.93 mm (3 mm from the suture) to 1.78 mm (6 mm from the suture) for women and from 3.24 mm (3 mm from the suture) to 1.99 mm (6 mm from the suture) for men. In general, the bone thickness of the palate is greater in the anterior region at 3 mm from the midpalatal suture at 30°. CONCLUSIONS: There was high variability in the bone thickness of the palate among patients and in different areas. Therefore, it is necessary to make an individualized diagnosis of the patient and manufacture the MARPE appliance carefully by performing a prior evaluation of the palatal bone thickness by means of CBCT to determine the ideal sites and inclinations for placement of mini-implants.

Effectiveness of disk repositioning and suturing comparing open-joint versus arthroscopic techniques: a systematic review and meta-analysis.

OBJECTIVE: The aim of this study was to present a systematic review of the effectiveness of discopexy in managing internal derangement of the temporomandibular joint (TMJ). STUDY DESIGN: We searched MEDLINE through PubMed, SCOPUS, Web of Science, and Cochrane Central Register of Controlled Trials and grey literature accessed through Google Scholar, Openthesis, and hand-searching from inception to July 2020. The search strategy yielded 363 potentially relevant studies. After screening titles and abstracts, 41 full-text articles were assessed for eligibility and 7 studies were included in the meta-analysis. RESULTS: There was an overall decrease in visual analog scale (VAS) pain score of 4.59 cm (95% confidence interval [CI], 2.03-7.16; P < .001) during the follow-up time and an overall increase of 10 mm (95% CI, 6.93-13.01; P < .001) in mouth opening after TMJ surgeries with discopexy. CONCLUSIONS: The available evidence showed an overall decrease in VAS pain score and an improvement in mouth opening after TMJ surgeries with discopexy. Changes in maximal interincisal opening were greater after arthroscopic disk repositioning compared to open-joint procedure.

Craniofacial and airway morphology of individuals with oculoauriculovertebral spectrum.

OBJECTIVES: The objectives of this study were to characterize the craniofacial and airway morphology of oculo-auriculo-vertebral spectrum (OAVS) individuals using computed tomography (CT) examination. SETTING AND SAMPLE POPULATION: This sample included individuals in the age range from 5 to 14 years, consisted of a group of 18 OAVS individuals (12 females and 6 males), Pruzansky-Kaban1 IIB and III and by a paired control group matched by age and sex for comparison of morphometric and airway variables. MATERIALS AND METHODS: Through the CT examination, airway analysis was performed using Dolphin Imaging® Software, and seven morphometric measurements were performed to evaluate craniofacial morphology by Materialize Mimics® Software. To compare airway and morphometric variables, the control group was used. Student's t test and Mann-Whitney U test were performed to compare differences between the groups. RESULTS: Statistically significant differences were showed between the control and OAVS groups for the variables: total airway (TA) area, volume and MAA, RP area, RP volume, RP MAA, RG volume, RG MAA, total posterior height diff, Md incl and y-axis asymmetry. Pearson and Spearman's correlation showed mostly moderate correlations between Mand Occlusal canting AS with TA area and RP volume, Ax-Gn with TA area and Hy-C3 with TA volume. CONCLUSIONS: The OAVS's airway was altered and worse than the control group. Our results suggest that the contralateral side of OAVS individuals is unaffected; however, longitudinal assessments are needed to confirm it. Hyoid bone and postural measures play an important role in interpreting airway features of individuals with and without OAVS.

Can palatal splint improve stability of segmental Le Fort I osteotomies?

OBJECTIVES: The purpose of this study was to evaluate the influence of a palatal splint on stability in multi-segment maxillary osteotomies. SETTING AND SAMPLE POPULATION: Retrospective series of fifty-one adult patients, consecutively operated with bilateral sagittal split osteotomy (BSSO) and three-piece maxillary osteotomies, divided according to the use of a palatal splint (Group 1, n = 30) or no palatal splint (Group 2, n = 21). MATERIALS AND METHODS: Maxillary surgical casts (T1) and post-retention casts (T2), taken at least six months after discontinuation of orthodontic retention, were digitized (MicroScribe-3DX), measured and compared. Fifty-one landmarks were identified on the maxillary, transverse dimension changes and arch length were calculated. Longitudinal changes in all measurements were assessed by t test. RESULTS: Post-surgical transverse instability in group 1 ranged from 0.3 ± 0.4 to -1.3 ± 0.2 mm and was statistically significantly smaller than in group 2 that ranged from -1.0 ± 0.3 to -2.5 ± 0.5 mm. CONCLUSIONS: The use of a palatal splint after segmental Le Fort I maxillary osteotomy improved transverse stability in the posterior region. The post-surgical transverse instability occurred only between canine gingival points and thus suggesting no clinical relevance.

Osteoarthritis of the Temporomandibular Joint can be diagnosed earlier using biomarkers and machine learning.

After chronic low back pain, Temporomandibular Joint (TMJ) disorders are the second most common musculoskeletal condition affecting 5 to 12% of the population, with an annual health cost estimated at $4 billion. Chronic disability in TMJ osteoarthritis (OA) increases with aging, and the main goal is to diagnosis before morphological degeneration occurs. Here, we address this challenge using advanced data science to capture, process and analyze 52 clinical, biological and high-resolution CBCT (radiomics) markers from TMJ OA patients and controls. We tested the diagnostic performance of four machine learning models: Logistic Regression, Random Forest, LightGBM, XGBoost. Headaches, Range of mouth opening without pain, Energy, Haralick Correlation, Entropy and interactions of TGF-ß1 in Saliva and Headaches, VE-cadherin in Serum and Angiogenin in Saliva, VE-cadherin in Saliva and Headaches, PA1 in Saliva and Headaches, PA1 in Saliva and Range of mouth opening without pain; Gender and Muscle Soreness; Short Run Low Grey Level Emphasis and Headaches, Inverse Difference Moment and Trabecular Separation accurately diagnose early stages of this clinical condition. Our results show the XGBoost + LightGBM model with these features and interactions achieves the accuracy of 0.823, AUC 0.870, and F1-score 0.823 to diagnose the TMJ OA status. Thus, we expect to boost future studies into osteoarthritis patient-specific therapeutic interventions, and thereby improve the health of articular joints.

3D Slicer Craniomaxillofacial Modules Support Patient-Specific Decision-Making for Personalized Healthcare in Dental Research.

The biggest challenge to improve the diagnosis and therapies of Craniomaxillofacial conditions is to translate algorithms and software developments towards the creation of holistic patient models. A complete picture of the individual patient for treatment planning and personalized healthcare requires a compilation of clinician-friendly algorithms to provide minimally invasive diagnostic techniques with multimodal image integration and analysis. We describe here the implementation of the open-source Craniomaxillofacial module of the 3D Slicer software, as well as its clinical applications. This paper proposes data management approaches for multisource data extraction, registration, visualization, and quantification. These applications integrate medical images with clinical and biological data analytics, user studies, and other heterogeneous data.

Cone-beam computed tomography airway measurements: Can we trust them?

INTRODUCTION: Pharyngeal airway space (PAS) assessment has been used in the past for a better understanding of orthodontic and surgical outcomes; however, this analysis could be unreliable. Our objective was to evaluate possible changes in the PAS reading in the same patient from their consecutive cone-beam computed tomography (CBCT) scans. METHODS: We evaluated a total of 27 patients' CBCT scans obtained at 2 time points with the use of a standardized acquisition protocol. The mean age at T0 was 31 years (range 17-62 years) and the follow-up records (T1) were taken after 4-6 months. Dolphin Imaging software was used to measure the volumes of the nasopharynx, oropharynx, and hypopharynx. We also evaluated the craniocervical position with the use of a lateral cephalogram. RESULTS: The variables exhibited high intraclass correlation coefficients (ICCs) when measuring the same CBCT scan twice (T0 and T0). However, The ICC between the measurements performed on the first and second CBCT scans (T0 and T1) showed that the only variable with high reproducibility between the 2 scans was cranial base, with an ICC >0.97. Average differences of 682.1 mm3, 2255.3 mm3, and 517.4 mm3 were found for the nasopharynx, oropharynx, and hypopharynx, respectively. Regarding the cephalometric angles, average differences between T0 and T1 scans were 0.6°, 2.7°, and 0.4° for OPT.CVT, OPT.SN, and cranial base, respectively. CONCLUSIONS: Different CBCT exams with equal scanning and patient positioning protocols can result in different 3D PAS readings. A more careful interpretation of CBCT volumetric data to achieve adequate conclusions of the clinical outcomes is necessary.

Shape variation analyzer: a classifier for temporomandibular joint damaged by osteoarthritis.

We developed a deep learning neural network, the Shape Variation Analyzer (SVA), that allows disease staging of bony changes in temporomandibular joint (TMJ) osteoarthritis (OA). The sample was composed of 259 TMJ CBCT scans for the training set and 34 for the testing dataset. The 3D meshes had been previously classified in 6 groups by 2 expert clinicians. We improved the robustness of the training data using data augmentation, SMOTE, to alleviate over-fitting and to balance classes. We combined geometrical features and a shape descriptor, heat kernel signature, to describe every shape. The results were compared to nine different supervised machine learning algorithms. The deep learning neural network was the most accurate for classification of TMJ OA. In conclusion, SVA is a 3D Sheer extension that classifies pathology of the temporomandibular joint osteoarthritis cases based on 3D morphology.

A web-based system for statistical shape analysis in temporomandibular joint osteoarthritis.

This study presents a web-system repository: Data Storage for Computation and Integration (DSCI) for Osteoarthritis of the temporomandibular joint (TMJ OA). This environment aims to maintain and allow contributions to the database from multi-clinical centers and compute novel statistics for disease classification. For this purpose, imaging datasets stored in the DSCI consisted of three-dimensional (3D) surface meshes of condyles from CBCT, clinical markers and biological markers in healthy and TMJ OA subjects. A clusterpost package was included in the web platform to be able to execute the jobs in remote computing grids. The DSCI application allowed runs of statistical packages, such as the Multivariate Functional Shape Data Analysis to compute global correlations between covariates and the morphological variability, as well as local p-values in the 3D condylar morphology. In conclusion, the DSCI allows interactive advanced statistical tools for non-statistical experts.

Software comparison to analyze bone radiomics from high resolution CBCT scans of mandibular condyles.

OBJECTIVES: Radiomics refers to the extraction and analysis of advanced quantitative imaging from medical images to diagnose and/or predict diseases. In the dentistry field, the bone data from mandibular condyles could be computationally analyzed using the voxel information provided by high-resolution CBCT scans to increase the diagnostic power of temporomandibular joint (TMJ) conditions. However, such quantitative information demands innovative computational software, algorithm implementation, and validation. Our study's aim was to compare a newly developed BoneTexture application to two-consolidated software with previous applications in the medical field, Ibex and BoneJ, to extract bone morphometric and textural features from mandibular condyles. METHODS: We used an imaging database of HR-CBCT TMJs scans with an isotropic voxel size of 0.08 mm3 . A single group with 66 distinct mandibular condyles composed the final sample. We calculated 18 variables for bone textural features and 5 for bone morphometric measurements using the Ibex, BoneJ and BoneTexture applications. Spearman correlation and Bland-Altman plot analyses were done to compare the agreement among software. RESULTS: The results showed a high Spearman correlation among the software applications ( r = 0.7-1), with statistical significance for all variables, except Grey Level Non-Uniformity and Short Run Emphasis. The Bland-Altman vertical axis showed, in general, good agreement between the software applications and the horizontal axis showed a narrow average distribution for Correlation, Long Run Emphasis and Long Run High Grey Level Emphasis. CONCLUSIONS: Our data showed consistency among the three applications to analyze bone radiomics in high-resolution CBCT. Further studies are necessary to evaluate the applicability of those variables as new bone imaging biomarkers to diagnose bone diseases affecting TMJs.

Three-dimensional quantitative assessment of surgical stability and condylar displacement changes after counterclockwise maxillomandibular advancement surgery: Effect of simultaneous articular disc repositioning.

INTRODUCTION: In this study, we quantitatively assessed 3-dimensional condylar displacement during counterclockwise maxillomandibular advancement surgery (CMMA) with or without articular disc repositioning, focusing on surgical stability in the follow-up period. METHODS: The 79 patients treated with CMMA had cone-beam computed tomography scans taken before surgery, immediately after surgery, and, on average, 15 months postsurgery. We divided the 142 condyles into 3 groups: group 1 (n = 105), condyles of patients diagnosed with symptomatic presurgical temporomandibular joint articular disc displacement who had articular disc repositioning concomitantly with CMMA; group 2 (n = 23), condyles of patients with clinical verification of presurgical articular disc displacement who had only CMMA; and group 3 (n = 14), condyles of patients with healthy temporomandibular joints who had CMMA. Presurgical and postsurgical 3-dimensional models were superimposed using voxel-based registration on the cranial base. Three-dimensional cephalometrics and shape correspondence were applied to assess surgical and postsurgical displacement changes. RESULTS: Immediately after surgery, the condyles moved mostly backward and medially and experienced lateral yaw, medial roll, and upward pitch in the 3 groups. Condyles in group 1 showed downward displacement, whereas the condyles moved upward in groups 2 and 3 (P ≤0.001). Although condylar displacement changes occurred in the 3 groups, the overall surgical procedure appeared to be fairly stable, particularly for groups 1 and 3. Group 2 had the greatest amount of relapse (P ≤0.05). CONCLUSIONS: CMMA has been shown to be a stable procedure for patients with healthy temporomandibular joints and for those who had simultaneous articular disc repositioning surgery.

Three-dimensional stability analysis of maxillomandibular advancement surgery with and without articular disc repositioning.

This retrospective cohort study aimed to assess, three-dimensionally, mandible and maxilla changes following maxillomandibular advancement (MMA), with and without repositioning of TMJ articular discs. The sample comprised cone-beam computed tomography data from 32 subjects: group 1 (n = 12) without disc displacement and group 2 (n = 20) with bilateral disc repositioning. An automatic cranial base superimposition method was used to register the images at three time points: T1 (preoperative), T2 (postoperative), and T3 (at least 11 months follow-up). To assess surgical changes (T2-T1) and adaptive responses (T3-T2), the images were compared quantitatively and qualitatively using the shape correspondence method. The results showed that surgical displacements were similar in both groups for all the regions of interest except the condyles, which moved in opposite directions - group 1 to superior and posterior positions, and group 2 to inferior and anterior positions. For adaptive responses, we observed high individual variability, with lower variability in group 2. Sagittal relapse was similar in both groups. In conclusion, there were no significant differences in skeletal stability between the two groups. The maxillomandibular advancement surgeries, with rotation of the occlusal plane, had stable results for both groups immediately after surgery and at 1-year follow-up.

Expansão mandibular por distração osteogênica ­ relato de caso / Mandibular expansion by osteogenic distraction ­ case report

Introdução: As deficiências transversais mandibulares são comumente corrigidas com expansão ortodôntica dentoalveolar, vestibularizações dentárias, desgastes interproximais e/ou extração dentária. Nesse contexto, a distração osteogênica da sínfise mandibular (DOSM) tem sido proposta como uma boa opção de tratamento. Objetivo: Relatar o caso clínico de um paciente com mandíbula atrésica tratado com DOSM, enfatizando a etapa ortodôntica pré-cirúrgica e a cirurgia propriamente dita. Resultados: Essa modalidade de tratamento aumentou significativamente a largura mandibular, dispensando a necessidade de tratamento ortodôntico com extrações. Conclusão: A distração osteogênica mediana transversal de mandíbula é uma técnica cirúrgica efetiva para correção de deficiências mandibulares transversais severas, em que os resultados obtidos exclusivamente com Ortodontia são limitados. Essa técnica permite movimentos esqueléticos amplos com um mínimo de recidiva por expandir concomitante o osso e os tecidos moles. (AU)

Introduction: Mandibular transversal deficiencies are commonly corrected with dentoalveolar orthodontic expansion, dental vestibularizations, interproximal wear and/or tooth extraction. In this context, the osteogenic distraction of the mandibular symphysis (ODMS) has been proposed as a good treatment option. Objective: To report the clinical case of a patient with atresic mandible treated with ODMS emphasizing the pre-surgical orthodontic stage and the surgery itself. Results: This modality of treatment significantly increased the mandibular width, dispensing the need for orthodontic treatment with extractions. Conclusion: Mandible transverse medial osteogenic distraction is an effective surgical technique for correction of severe transverse mandibular deficiencies, in which results obtained exclusively with orthodontics are limited. This technique allows large skeletal movements with minimal recurrence by expanding concomitantly the bone and soft tissues.(AU)

Effect of temporomandibular joint articular disc repositioning on anterior open-bite malocclusion: An orthodontic-surgical approach.

An anterior open bite is a challenge to orthodontic treatment; it has a multifactorial etiology and a wide range of intervention options. Temporomandibular joint (TMJ) disorders are a risk factor for the development of malocclusions such as the anterior open bite, especially in patients who have TMJ osteoarthritis with disc displacement. Articular disc repositioning surgery is an available option for treating this pathology, and it contributes to maintaining the condyles in a more stable position. The aim of this article was to report the case of a 20-year-old woman diagnosed with anterior open bite and TMJ osteoarthritis with bilateral disc displacement. The patient received both orthodontic treatment and TMJ disc repositioning surgery. Cone-beam computed tomography was used to create 3-dimensional models of the condyles with regional superposition, and assessment of bone remodeling was performed at different time intervals. Complete orthodontic and surgical treatment time was approximately 12 months. The results provided a stable correction of the patient's anterior open bite with a 2-year follow-up and favorable bone remodeling of the condyles due to functional improvement of the TMJ.

Accuracy of biomarkers obtained from cone beam computed tomography in assessing the internal trabecular structure of the mandibular condyle.

OBJECTIVE: The aim of this study was to validate the ability of cone beam computed tomography (CBCT) to measure condylar internal trabecular bone structure and bone texture parameters accurately. STUDY DESIGN: Sixteen resected condyles of individuals undergoing temporomandibular joint replacement were collected and used as samples. These condyles were then radiographically imaged by using clinically oriented dental CBCT and research oriented micro-computed tomography (micro-CT). The CBCT scans were then compared with the gold standard micro-CT scans in terms of 21 bone imaging parameters. Descriptive histologic investigation of the specimens was also performed. RESULTS: Significant correlations were found for several imaging parameters between the CBCT and micro-CT images, including trabecular thickness (r = 0.92), trabecular separation (r = 0.78), bone volume (r = 0.90), bone surface area (r = 0.79), and degree of anisotropy measurements (r = 0.77). CONCLUSIONS: Measurements of trabecular thickness, trabecular separation, bone volume, bone surface area, and degree of anisotropy obtained from high-resolution dental CBCT images may be suitable bone imaging biomarkers that can be utilized clinically and in future research.

From ideal occlusion to dentofacial deformity and back to ideal: an osteochondroma treatment with lingual orthodontics.

This original case report describes the morphologic changes caused by a mandibular condylar osteochondroma (OC) on a female patient and its treatment. The changes were identified by comparing her final records from a previous orthodontic treatment, without the presence of OC, to records taken before a second treatment, with a developed OC. The diagnostics and treatment for the OC and its consequences were described and discussed in this paper. Treatment included orthodontics with a lingual appliance, low condylectomy on the affected side, high condylectomy on the contralateral side, bilateral disc repositioning and orthognathic surgery. It was concluded that the OC caused a Class III subdivision malocclusion, midline deviation and an edge-to-edge bite on the left side, a cant of the occlusal plane on the Z-axis and a deviation of the pogonion to the left. Treatment was successful and stable long term (36 months) with good occlusal, aesthetical and functional results.

Orthodontic Traction of Impacted Canine Using Cantilever.

The impaction of the maxillary canines causes relevant aesthetic and functional problems. The multidisciplinary approach to the proper planning and execution of orthodontic traction of the element in question is essential. Many strategies are cited in the literature; among them is the good biomechanical control in order to avoid possible side effects. The aim of this paper is to present a case report in which a superior canine impacted by palatine was pulled out with the aid of the cantilever on the Segmented Arch Technique (SAT) concept. A 14.7-year-old female patient appeared at clinic complaining about the absence of the upper right permanent canine. The proposed treatment prioritized the traction of the upper right canine without changing the occlusion and aesthetics. For this, it only installed the upper fixed appliance (Roth with slot 0.018), opting for SAT in order to minimize unwanted side effects. The use of cantilever to the traction of the upper right canine has enabled an efficient and predictable outcome, because it is of statically determined mechanics.